1 Series E87 120i (N43) 5-door
11 12 000
Removing and installing/sealing cylinder head
cover (N43)
Necessary preliminary tasks:
•
Remove ignition coil cover.
•
Remove ignition coils.
•
Detach ignition coil wiring harness and injectors from cylinder
head cover and lay to one side.
•
Remove H.P. pump.
•
Remove all injectors.
Press lock.
Pull off the hose for the engine breather.
Release bolts (1).
Tightening torque: 11 12 4AZ
.
Release screws (1 and 2).
Remove cylinder head cover.
Installation:
Replace seal.
Tightening torque: 11 12 4AZ
.
RA Removing and installing/sealing cylinder head cover (N43)
BMW AG - TIS
23.01.2013 06:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -