1 Series E87 120i (N43) 5-door
11 13 000
Removing and installing, sealing or replacing
oil sump (N43)
Important!
It is essential to adhere to the exact filling capacities specified.
Overfilling the engine with engine oil will result in engine
damage.
Checking and drip-off times must be observed.
Necessary preliminary tasks:
•
Remove front splash guard.
•
Drain engine oil.
•
Secure engine in installation position.
•
Unlock and detach plug connection to oil level sensor.
•
Unlock and detach plug connection to chassis and
suspension sensor.
•
Lower front axle
Front axle alignment is not required.
Note:
A residual amount of oil remains in front section of oil sump. Have
a cleaning cloth a suitable container reader.
Release all bolts in area of line (1).
Tightening torque, 11 13 2AZ
.
RA Removing and installing, sealing or replacing oil sump (N43)
BMW AG - TIS
23.01.2013 06:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
