1 Series E87 120i (N43) 5-door
Lubricate conrod bearing shells.
Fit bearing caps (2) so that pairing letters match up.
Install new connecting rod bolts (1).
Tighten down conrods with special tool 00 9 120 .
Tightening torque 11 24 1AZ.
Assemble engine.
RA Removing and installing/replacing all pistons (N43)
BMW AG - TIS
23.01.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
