1 Series E87 120i (N43) 5-door
Important!
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Install clutch plate (1) in correct position.
Pay attention to text "engine end" / "transmission side".
Centre clutch plate (1) with special tool 21 2 250 .
Push SAC clutch onto dowel pins (1) located in flywheel and
screw down.
Tightening torque, 21 21 1AZ
.
Important!
Locking piece (1) may only be removed with SAC clutch
screw-mounted!
RA Removing and installing/replacing clutch (SAC 228 N45/N46/N45T/N43/N46T)
BMW AG - TIS
23.01.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
