1 Series E87 120i (N43) 5-door
Important!
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
5.
Keep special tools dry, clean and (down to the spindle)
free from grease.
6.
Impact screwdrivers are prohibited!
7.
Do not compress coil spring to full extent.
Necessary preliminary tasks:
•
Remove rear wheel
Removal:
Insert lower spring plate 33 5 012 centrally into coil spring and
turn to lowest coil.
Guide spindles 33 5 013 , 33 5 014 , 33 5 015 from below
through camber arm and lower spring plate 33 5 012 .
Insert upper spring plate 33 5 011 sideways into coil spring and
turn to uppermost coil.
Important!
Make sure spindle (hexagon) is correctly seated in upper
spring plate 33 5 011 .
Pull spindle 33 5 013 downwards.
RA Removing and installing / replacing rear left or right coil spring
BMW AG - TIS
23.01.2013 09:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
