1 Series E87 120i (N43) 5-door
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 220 mm from roof edge
Measurement b = approx. 110 mm from centrepoint of hole dia. 25 mm.
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Weld in reinforcing panels at all severance cuts.
View from underbody:
Open weld joint in area (1).
Note:
Drill through 2 plates.
View from interior:
Open weld joint in area (1).
Note:
Drill through 2 plates.
Open weld joints in areas (1).
Open brazed joint in area (2).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
23.01.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -