1 Series E87 120i (N43) 5-door
Release screws (1) on wheel arch trim (2) on left/right.
Lift out wheel arch trim (2) at side.
Installation:
Make sure wheel arch trim (2) is in correct position.
Release screws (1) on bumper trim (2).
Important!
Do not damage bumper trim when pulling off.
Slide special tool 00 9 317 between bumper trim (1) and
bracket (2).
Release catches in area (3) and lever out bumper trim (1) in
outward direction.
Pull bumper trim (1) forwards a little.
If necessary, disconnect plug connections on ultrasonic sensors
and/or front fog lamps.
If necessary, unlock and detach hose for headlight cleaning
system.
Remove bumper trim (1) towards front with aid of a 2nd person.
Installation:
Catches (2) of bumper trim (1) must not be damaged.
Height adjustment, refer to Gap dimensions, body.
RA Removing and installing (replacing) front bumper trim (up to 03/2007)
BMW AG - TIS
23.01.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
