1 Series E87 120i (N43) 5-door
61 31 023
Removing and installing/replacing Start/Stop
switch
Necessary preliminary tasks:
•
Remove center fresh air grill
Press catches (2) together and unclip Start/Stop switch (1) with
associated ribbon cable in direction of arrow.
Important!
Carefully unlock and disconnect associated plug connection
for ribbon cable.
Replace the ribbon cable if damaged.
The ribbon cable leads to:
•
Control unit for Car Access System
•
Insert for radio control key
Remove Start/Stop switch (1).
RA Removing and installing/replacing Start/Stop switch
BMW AG - TIS
23.01.2013 13:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -