1 Series E87 120i (N43) 5-door
61 35 015
Removing and installing (replacing) control
unit for Car Access System
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Note:
The comfort access system is a radio-based system and can be
interfered with by radio waves from other systems (e.g. mobile
phone).
Necessary preliminary tasks:
•
Remove left fresh-air grill
•
Remove trim panel for pedal assembly
Note:
For purposes of clarity, the illustration shows the bottom left
instrument panel trim removed.
Disconnect plug connection (2).
Important!
Carefully disconnect plug connection for ribbon cable (1).
Replace ribbon cable (1) if damaged.
The ribbon cable leads to:
•
Insert for radio control key
•
Start/Stop switch
Release screw (3), feed control unit for Car Access System (4)
out of holder and remove.
RA Removing and installing (replacing) control unit for Car Access System
BMW AG - TIS
23.01.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
