1 Series E87 120i (N46) 5-door
Remove screws and nuts.
Remove cross-member.
Tightening torque 23 71 1AZ/ 2AZ
Lever out retainer (1).
Disengage shift rod (2).
Installation:
Grease shift rod.
Grease,
Refer to BMW Service Operating Fluids.
Make sure shims (3) are in correct position.
Release and remove bearing pins (1) in direction of arrow.
Lift out shift arm (1).
Installation:
Grease bearing pins (1).
Grease,
Refer to BMW Service Operating Fluids.
RA Removing and installing transmission (GS6-37BZ)
BMW AG - TIS
24.01.2013 05:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -