1 Series E87 120i (N46) 5-door
•
Unlock plug (1) by turning and disconnect
•
Do not touch pins
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release nut (1) and bracket from transmission oil lines on oil
sump.
Prepare special tool (1) 24 4 161 (A) with shaped section (2)
24 4 165 side (A) to (A).
RA Removing and installing automatic transmission (6HP19Z) N46
BMW AG - TIS
24.01.2013 06:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -