1 Series E87 120i (N46) 5-door
25 11 211
Replacing shift arm for shift-lever mount
Necessary preliminary tasks:
•
Remove shift lever.
•
Remove support bearing from fixture
Lever out spring (1) with a screwdriver from lug (2) on housing.
Tilt spring upwards.
Remove bearing pin (1).
Remove shift arm.
Installation:
Grease bearing pins (1).
Detach support bearing (1) from shift arm.
Installation:
Grease bearing pin of shift arm.
Fit support bearing (1) with opening (3) towards rear top on
new shift arm.
RA Replacing shift arm for shift-lever mount
BMW AG - TIS
24.01.2013 06:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -