1 Series E87 120i (N46) 5-door
Chapter 7).
Remove cavity bulkhead (2).
Mark severance cut in accordance with specified measurement and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 220 mm from centrepoint of 25 mm dia. bore.
Open weld joints in areas (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffle (2).
-
Weld in reinforcing panels at all severance cuts.
Mark severance cut in accordance with specified measurement
and cut.
Measurement a = approx. 70 mm from centrepoint of 20 mm
dia. bore.
Open weld joints in areas (1).
Installation:
Weld new components in areas (2) additionally.
Open weld joints in areas (1).
Installation:
Weld new components in areas (2) additionally.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
24.01.2013 08:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
