1 Series E87 120i (N46) 5-door
51 16 210
Removing and installing/replacing trim for
preselector lever
Important!
Risk of damage!
When working on trim panel components, make sure that the
sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
•
Apply parking brake
•
Remove gaiter for shift tower
Unclip trim for preselector lever (1) in upwards direction from
trim (2).
Disconnect associated plug connections and remove trim for
preselector lever (1) towards top.
Installation:
Catches (1) on preselector lever trim (2) must not be damaged.
RA Removing and installing/replacing trim for preselector lever
BMW AG - TIS
24.01.2013 09:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -