1 Series E87 120i (N46) 5-door
51 23 105
Removing and installing/replacing right
hood/bonnet lock
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove intake duct
Lever out cover (1) from coupler (2) in direction of arrow and
remove.
Lever out Bowden cable (3) in direction of arrow.
Unclip coupler (1) with special tool 00 9 317 in direction of
arrow.
RA Removing and installing/replacing right hood/bonnet lock
BMW AG - TIS
24.01.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
