1 Series E87 120i (N46) 5-door
51 23 213
Removing and installing/replacing cable for
hood/bonnet lock (to interior)
Necessary preliminary tasks:
•
Remove footwell side trim panel
Disengage Bowden cable (1) from release lever (2) and feed out
in direction of arrow.
Release holder (1).
Release catches (3) and remove right cover (2).
Release expander rivet (1) and nut (2).
Feed out water channel (3) towards top.
RA Removing and installing/replacing cable for hood/bonnet lock (to interior)
BMW AG - TIS
24.01.2013 10:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -