1 Series E87 130i (N52) 5-door
11 53 740
Removing and installing/replacing water pipe
(N52)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Remove front splash guard.
•
Drain coolant from radiator.
Release screws (2).
Tightening torque: 11 53 2AZ
.
Remove water pipe in direction of arrow.
Installation:
Seal (1) must not show any traces of damage; check and if
necessary replace.
RA Removing and installing/replacing water pipe (N52)
BMW AG - TIS
27.01.2013 05:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
