1 Series E87 130i (N52) 5-door
11 62 000
Removing and installing, sealing/replacing
both exhaust manifolds (N52)
Necessary preliminary tasks:
•
Remove engine splash guard.
•
Remove reinforcement plate.
•
Remove exhaust system.
•
Remove monitor sensor from cylinders 4 to 6.
Release all nuts (2).
Tightening torque: 11 62 1AZ
.
Feed out exhaust manifold (3) downwards (cylinders 1 to 3)
Release all nuts (1).
Tightening torque: 11 62 1AZ
.
Feed out exhaust manifold (4) downwards (cylinders 4 to 6)
Assemble engine.
RA Removing and installing, sealing/replacing both exhaust manifolds (N52)
BMW AG - TIS
27.01.2013 05:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
