1 Series E87 130i (N52) 5-door
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 220 mm from roof frame
Measurement b = approx. 80 mm from middle of lower lock striker screw point.
Open weld joints in areas (1).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles (2).
-
Weld in reinforcement plates at severance cuts.
Open weld joints in areas (1).
Open brazed joint in area (2).
RA Replacing rear left side panel (partial replacement before longitudinal member c
BMW AG - TIS
27.01.2013 09:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -