1 Series E87 130i (N52) 5-door
Feed out Bowden cable (1) in direction of engine compartment.
Installation:
Lay Bowden cable (1) without kinks.
Important!
Grommet (2) must not be damaged.
Check that grommet (2) is correctly seated (water ingress).
Lever out cover (1) from coupler (2) in direction of arrow.
Lever out Bowden cable (3) in direction of arrow and remove.
RA Removing and installing/replacing cable for hood/bonnet lock (to interior)
BMW AG - TIS
27.01.2013 10:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -