1 Series E87 130i (N52K) 5-door
11 41 000
Removing and installing/replacing oil pump
(N52K)
Necessary preliminary tasks:
•
Remove oil sump
Release screws (1).
Tightening torque 11 41 1AZ
.
Installation:
Replace aluminium screws.
Remove intake pipe (2) in direction of arrow.
Installation:
Replace sealing ring.
Note:
To release bolt (1), insert a 6 mm drill bit between sprocket wheel
and oil pump housing.
Release bolt (1).
Tightening torque 11 41 6AZ
.
Release screws (2).
Tightening torque 11 41 5AZ
.
Installation:
Replace aluminium screws.
Important!
Observe different screw lengths.
Release screws (1).
Tightening torque 11 41 2AZ
.
Tightening torque 11 41 3AZ
.
Installation:
Replace aluminium screws.
RA Removing and installing/replacing oil pump (N52K)
BMW AG - TIS
28.01.2013 06:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -