1 Series E87 130i (N52K) 5-door
51 12 156
Removing and installing (replacing) rear
bumper trim (upper section) (up to 03/2007)
Necessary preliminary tasks:
•
Remove bumper trim (lower section)
•
Remove rear light
•
Remove license plate lights
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release screws (1) on wheel arch trim (2).
Installation:
Make sure wheel arch trim (2) is in correct position.
Release screws (1) and expander rivets (2).
Snap out bumper trim (1) sideways on left/right in direction of
arrow.
Installation:
Ensure guide (2) is correctly seated.
RA Removing and installing (replacing) rear bumper trim (upper section) (up to 03/2
BMW AG - TIS
29.01.2013 03:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -