1 Series E87 130i (N52K) 5-door
51 13 280
Removing and installing/replacing trim strip
on roof frame at left or right
Special tools required:
•
00 9 321
Lever out trim strip (1) with special tool 00 9 321 at front.
Unclip trim strip (1) in direction of arrow.
Installation:
If necessary, replace faulty clips (1) and seals (2) on trim
strip (3).
Installation:
Push trim strip (1) at front into seal (2).
Trim strip (1) must be flush with edge (3) at front and rear.
RA Removing and installing/replacing trim strip on roof frame at left or right
BMW AG - TIS
29.01.2013 03:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -