1 Series E87 130i (N52K) 5-door
64 11 871
Removing and installing/replacing servodrive
for blending flap (left)
Important!
Servomotors must be re-addressed in the event of
replacement!
Addressing can only be carried out with the BMW diagnosis
system.
Service functions:
-
Body
-
Heating and A/C function
-
Flap motors
-
Re-address flap motors
Necessary preliminary tasks:
•
Remove trim for instrument panel at bottom left
•
E90/E91/E92/E93:
-
Remove panel for pedal assembly
Note:
Lower instrument panel trim partially shown transparent.
Detach left footwell heating duct (1) in area (2) in direction of
arrow.
Detach left footwell heating duct (1) with adapter (3) from
heater/air conditioner and remove in direction of arrow from left
rear compartment heating duct (4).
RA Removing and installing/replacing servodrive for blending flap (left)
BMW AG - TIS
29.01.2013 11:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -