1 Series 120i (N43) Convertible
Remove radial shaft seals (1).
Remove crankshaft (2).
Crankshaft identification
The three letters shown in the picture denote the standard
crankshaft.
Crankshaft identification
The letter featured in the illustration directly before the numeric
code signifies on a production crankshaft:
S = original dimension
B = construction stage 1 (- 0.25 mm)
RA Replacing crankshaft (N43)
BMW AG - TIS
15.01.2013 12:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -