1 Series 120i (N43) Convertible
12 42 500
Replacing battery positive lead (between
jump-start connection point, alternator and
starter motor) (N42, N40, N46, N45, N43)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove intake air manifold
E46:
Fold up protective cap (1).
Slacken nut (2).
Disconnect battery positive lead (3) from jump start terminal.
Tightening torque 12 42 1AZ
.
E81, E87, E90:
Take off cap.
Unfasten nut.
Disconnect battery positive lead (1) from jump start terminal.
Tightening torque 12 42 1AZ
.
RA Replacing battery positive lead (between jump-start connection point, alternator
BMW AG - TIS
15.01.2013 13:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
