1 Series 120i (N43) Convertible
Important!
The tightening sequences and tightening torques of the screw
connections must be adhered to when reassembling!
Disregard of these requirements may result in leaks!
Important!
Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.
Introduced contaminants can cause malfunctions in the
system!
•
Do not allow any dirt particles or foreign bodies to get
into the system.
•
Remove all traces of dirt before removing pipes or
individual components.
•
Use only fluff-free cloths.
•
Seal all fuel system openings with protective caps or
plugs.
Necessary preliminary tasks:
•
Remove feed line
Recycling:
Fuel escapes when fuel lines are detached.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing or replacing delivery line (between high-pressure pump a
BMW AG - TIS
15.01.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
