1 Series 120i (N43) Convertible
51 24 145
Removing and installing/replacing button for
rear lid actuation
Special tools required:
•
00 9 323
Move special tool 00 9 323 under front edge of button (1) and
lever out button (1).
Pull button (1) out of rear lid (2).
Disconnect plug (1) and remove button (2).
Installation:
Perform function check with rear lid open.
Replacement:
Carefully release catches (1) and remove microswitch (2).
RA Removing and installing/replacing button for rear lid actuation
BMW AG - TIS
15.01.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
