1 Series 120i (N43) Convertible
51 44 ...
Removing and installing/replacing front
roofliner trim
Important!
Risk of damage!
When working on trim panel components, make sure that the
sensitive surfaces are not scratched or damaged.
Necessary preliminary tasks:
•
If necessary, open convertible top
•
Remove roof switch cluster
•
Remove both front mirror lights
•
Remove both sun visors
•
Remove both trims for front roof pillar
Fold back mucket (1) at top to one side and release screw (2)
underneath on both sides.
Installation:
Make sure mucket (1) is correctly seated on trim (3) along
dashed line.
Release mucket (1) from trim (2).
Pull back trim (2) in direction of arrow and remove.
Installation:
Make sure mucket (1) is correctly seated.
RA Removing and installing/replacing front roofliner trim
BMW AG - TIS
15.01.2013 18:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
