1 Series 120i (N43) Convertible
51 21 140
Removing and installing/replacing complete
lock cylinder in left or right front door
Lever out cap (1) and release screw underneath.
Installation:
If necessary, replace faulty trim (1).
Insert ignition key into lock cylinder.
Turn ignition key slightly and pull off cover (1) in direction of
arrow with outside door handle (2) opened slightly.
Installation:
Lock cylinder must be correctly seated in door lock.
Check function of lock cylinder.
Version with light package:
Installation:
Make sure outside door handle light (1) is correctly positioned in
area (2).
Guides (3) of outside door handle light (1) must be correctly
seated in carrier for outside door handle (4).
Replacement:
Remove catches (1) and detach cover (2) from lock cylinder (3).
Installation:
Catches (1) of cover (2) must not be damaged.
Paddle (4) of lock cylinder (3) must not be damaged.
RA Removing and installing/replacing complete lock cylinder in left or right front
BMW AG - TIS
15.01.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
