1 Series 120i (N43) Convertible
Unclip coupler (1) with special tool 00 9 317 in direction of
arrow.
Installation:
Catches (1 and 2) on cable for hood/bonnet lock (3) must not
be damaged.
Unclip cable (1) from retaining clip (2) and feed out through front
panel (3).
Installation:
Retaining clip (2) must not be damaged.
RA Removing and installing/replacing cable for hood/bonnet lock (in engine compartm
BMW AG - TIS
15.01.2013 19:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -