1 Series 120i (N43) Convertible
Release screw (1) and remove belt deflection fitting (2).
Tightening torque 72 11 03AZ
.
Unclip trim (3).
Release screw (4).
Unclip side trim panel upper section (5) with special tool
00 9 317 from retainers.
Feed side trim panel upper section (5) out of seat belt and lay to
one side.
Installation:
Make sure trim (3), side trim panel upper section (5) and belt
guide are correctly seated.
Replacement:
•
Replace side trim panel upper section at rear
RA Removing and installing rear left or right side trim panel upper section
BMW AG - TIS
15.01.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -