1 Series 120i (N43) Convertible
51 47 000
Removing and installing/replacing front
(inside) left or right entrance cover strip
Important!
Risk of damage!
Risk of breakage to connecting lug on B-pillar trim panel.
Important!
Risk of damage!
Do not raise entrance cover strip (1) over entire length
simultaneously.
Detach entrance cover strip (1) at clips (2) from front to rear.
Detach entrance cover strip (1) from B-pillar trim panel at bottom
in direction of arrow.
If necessary, lever out clips (2) from floor pan.
Installation:
Fit entrance cover strip (2) with preinstalled clips (1).
If necessary, replace faulty clips (1).
Connecting lug (3) of entrance cover strip (2) must not be
damaged.
RA Removing and installing/replacing front (inside) left or right entrance cover st
BMW AG - TIS
15.01.2013 19:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
