bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Repair Instructions For Convertible Top Hydraulic System|Page 1950 > < 1 RA Opening_closing Convertible Top In Event Of A Technical Fault|Page 1948
Page 1
background image

54 34 ...

Repair instructions for convertible top hydraulic system

1.

Definitions of terms

Hydraulic system
(untensioned state):

Turn ignition lock to "0" position.

Convertible top slowly collapses in

extreme position under its own weight

Open shut-off valve for emergency

opening

Short circuit in hydraulic system 
Observe Point 3

Mechanical actuation:
Emergency actuation:

Convertible top is opened or closed by

hand

Always move convertible top with aid of

a second person

Observe Point 3

Closed system:

All lines are connected

Function Test:

Open and close convertible top several

times (min. 3 times)

Check can be carried out on convertible

top while removed

Check fluid level in hydraulic unit; if

necessary, top up fluid

refer to Owner's Handbook

Convertible top stowed:

Convertible top fully open (folded

together)

When convertible top is installed, it
rests on the stowage shelf

 

2.

When working on hydraulic system, observe the following

After it has been removed, the convertible top must be safely set down or spread out.

The special tool must be used.

The universal lifter is absolutely required here.

When the hydraulic system is open (unscrewing of lines, topping up of fluid, etc.), always provide sufficient
cloths to catch leak-off fluid.

Also provide an adherent protective cover to cover/protect fittings.

When opening the hydraulic system, make absolutely sure that no dirt, dust or chips can get into the hydraulic
circuit.

Disconnect feed and return lines if possible at a later stage, when the convertible top is stowed and
untensioned (check fluid, see also Point 3).

Once the hydraulic system has been opened, first check the fluid level after completing the tasks before
carrying out a function test.

After disconnecting the hydraulic lines from hydraulic components, do not move the convertible top if at all

RA  Repair instructions for convertible top hydraulic system

BMW AG - TIS

15.01.2013  20:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Repair Instructions For Convertible Top Hydraulic System|Page 1950 > < 1 RA Opening_closing Convertible Top In Event Of A Technical Fault|Page 1948