1 Series 120i (N43) Convertible
67 62 000
Removing and installing or replacing flat
motor for front left or right power window unit
Necessary preliminary tasks:
•
Remove sound insulation in front door
Release screw (3) and disconnect plug connection (2).
Release screws (1) and remove flat motor.
Tightening torque 67 62 1AZ
.
Installation:
Make sure bracket (4) is in correct installation position.
Fit flat motor exactly on teeth of power window unit.
Carry out function check (one-touch function, anti-trapping
protection and, if necessary, comfort function).
Replacement:
Carry out normalization
RA Removing and installing or replacing flat motor for front left or right power wi
BMW AG - TIS
15.01.2013 23:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
