1 Series 125i (N52K) Convertible
51 12 162
Removing and installing/replacing rear
bumper lower trim (M Technic aerodynamic
kit)
Important!
Risk of damage!
When working on trim panel components, make sure that the
sensitive surfaces are not scratched or damaged.
Release screws (1) on bumper lower trim (2).
Unclip bumper lower trim (2) along dashed line and remove.
Installation:
Catches (1) must not be damaged
Replacement:
•
If necessary, replace trim (2) on bumper lower trim
RA Removing and installing/replacing rear bumper lower trim (M Technic aerodynamic
BMW AG - TIS
17.01.2013 11:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
