1 Series 125i (N52K) Convertible
51 17 324
Removing and installing/replacing trim strip
on convertible top compartment lid
Important!
Risk of damage!
Make sure body or paint surfaces are not damaged by
scratches.
Necessary preliminary tasks:
•
Open convertible top compartment lid, fold in convertible top
if necessary
Release nuts (1) on inside of convertible top compartment
lid (2).
Close convertible top compartment lid (2).
Remove trim strip (3) straight upwards.
Important!
Risk of damage!
When the trim strip (3) is removed, the screws could work
loose and fall onto the painted attachment parts.
Installation:
Seal (1) must not be damaged.
Make sure seal (1) is correctly seated on trim strip (3).
If necessary, push all screw fittings (2) into markings of trim
strip (3).
RA Removing and installing/replacing trim strip on convertible top compartment lid
BMW AG - TIS
17.01.2013 11:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -