1 Series 125i (N52K) Convertible
51 71 120
Removing and installing/replacing cowl panel
seal
Necessary preliminary tasks:
•
If necessary, open convertible top
•
Remove trim strip on rain gutter on left and right
Fold back seal (1) at top to one side and release screw (2)
underneath on both sides.
Installation:
Make sure seal (1) is correctly seated on trim (3) along dashed
line.
Detach seal (1) along dashed line from window frame.
Installation:
If necessary, moisten seal (1) with water for better fitting.
Make sure seal (1) is correctly seated in retaining strip (2) and in
area of arrows.
RA Removing and installing/replacing cowl panel seal
BMW AG - TIS
17.01.2013 16:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
