1 Series 125i (N52K) Convertible
65 12 072
Removing and installing (replacing) amplifier
(Top HiFi system)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove rear left side trim panel
Release screws (1).
Release nut (2) and feed out amplifier (3) towards top.
Disconnect plug connection (1).
Pull off retaining plates (2) in direction of arrow and remove
amplifier (3) from mounting.
Installation:
Make retaining plates (2) are correctly seated.
RA Removing and installing (replacing) amplifier (Top HiFi system)
BMW AG - TIS
17.01.2013 18:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
