1 Series 125i (N52K) Convertible
72 12 004
Removing and installing/replacing knee
airbag module for driver protection
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove lower trim from instrument panel
Unclip airbag module for driver protection from trim.
Installation:
Replace defective retainers.
Important!
Always replace airbag module for driver protection completely.
Do not carry out any repairs to the airbag module.
RA Removing and installing/replacing knee airbag module for driver protection
BMW AG - TIS
17.01.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
