1 Series 125i (N52K) Convertible
Unclip cable holder (1) from seat mechanism (2).
Unscrew nuts (1).
Installation:
Replace nuts.
Tightening torques 72 12 02AZ
.
Important!
Feed the wiring harness carefully through the seat and
backrest mechanism as the edges of the frame can be sharp.
Installation:
Make sure wiring harness is correctly laid.
Assemble front seat.
RA Removing and installing side airbag (sport seat)
BMW AG - TIS
17.01.2013 19:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
