3 Series E30 318i (M10) SAL
Bosch:
Installation:
Clean contact surfaces and check pretension of contact
spring, replace regulator switch if necessary.
Measurement A = min. 5 mm.
Check collector ring for wear and recondition if necessary.
Valeo:
Slacken nut (1).
Slacken nut (2).
Release screws (3).
Release cover (4).
Valeo:
Release screws.
Remove regulator switch (1) towards top.
Valeo:
Installation:
Clean contact surfaces and check pretension of contact
spring, replace regulator switch if necessary.
Measurement A = min. 5 mm.
Check collector ring for wear and recondition if necessary.
RA Replacing voltage regulator
BMW AG - TIS
19.01.2013 15:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -