3 Series E30 318i (M40) CONVER
12 12 011
Replacing spark plugs (M40, M43, M43TU)
Remove spark-plug connectors.
Unscrew the spark plug using special tool 12 1 171.
Installation:
Using special tool 12 1 171 in conjunction with special tool
12 1 200. Tighten spark plugs.
If special tool 12 1 200 is not used, note Tightening Torque,
refer to Technical Data 12 12 1AZ
Note arrangement of ignition leads.
RA Replacing spark plugs (M40, M43, M43TU)
BMW AG - TIS
19.01.2013 23:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
