3 Series E30 318i (M40) TOUR
Remove upper toothed belt cover.
Installation:
Note dowel sleeves on upper screws.
Turn central screw to rotate crankshaft in normal direction of
rotation until piston of first cylinder is at firing TDC.
Secure crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before switching on the
engine.
Locate camshaft with special tool 11 3 190 in firing TDC position
of first cylinder.
Unfasten camshaft gear approx. half a turn.
RA Removing toothed belt for camshaft drive (M40)
BMW AG - TIS
21.01.2013 02:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -