3 Series E30 318i (M40) TOUR
33 13 611
Replacing differential bevel gears (Type K) -
final drive removed -
Remove final drive housing, contained in Replace drive
pinion with crown wheel,
refer to 33 12 551.
Press off pulse spider.
Installation:
Press on pulse alternator wheel with special tool 33 1 304
(union ring).
Remove crown wheel (cold).
Caution!
If the bearings are also replace, first install crown wheel after
determining friction torque determination - replace bearings
for differential,
refer to 33 11 731.
Installation:
Clean tapped bores thoroughly (tapper).
Heat plate spring to max. 100
°
C (thermo-chrome pin).
Mount crown wheel with two locally manufactured staybolts for
guiding.
Caution!
Use new ring gear bolts.
RA Replacing differential bevel gears (Type K) - final drive removed -
BMW AG - TIS
21.01.2013 03:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -