3 Series E30 318i (M42) CONVER
Open (four) clamps.
Remove upper section of air-filter housing with air-flow sensor.
Installation:
Check that hose connections are firmly seated.
Unscrew nuts.
Installation:
Note code number (1), production date (2).
Check engine idle speed and CO content at idle speed,
Replace seal (3).
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
RA Removing and installing or replacing volume air flow sensor (M42, M43)
BMW AG - TIS
21.01.2013 05:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
