3 Series E30 318i (M42) SAL
13 64 150
Removing and installing/replacing all fuel
injection valves (M42, M43 up to 9/95)
Turn and pull off multiple pin connector (1).
Unfasten screw from active carbon filter lead.
Loosen hose clamp and pull bellows off throttle-valve assembly.
Unfasten clips (4 pieces), remove upper section of air-filter
housing with air-mass sensor and bellows.
RA Removing and installing/replacing all fuel injection valves (M42, M43 up to 9/95
BMW AG - TIS
21.01.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
