3 Series E30 318is (M42) SAL
Removing intake manifold (M42)
Unscrew upper manifold section.
Unscrew rear brace.
Pull off hose.
Loosen front brace.
Unscrew holder for preheater.
Installation:
If applicable, bend holder for preheater far enough for
bearing surface of preheater to bear firmly on throttle-valve
assembly.
Unscrew bolts.
RA Removing intake manifold (M42)
BMW AG - TIS
22.01.2013 00:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
