3 Series E30 325i (M20) CONVER
Installation:
Dip new shaft seals in final drive gear lube.
Drive in shaft seals with special tool 33 1 230 in conjunction with
special tool 00 5 500 up to stop.
Replace drive flange if the bearing surface is seriously scored.
Note:
The special tool 33 1 230 may have to be remachined on
account of the casting tolerances.
Drive in new retaining plate with special tool 33 4 050 and
special tool 00 5 500.
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
25.01.2013 23:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -