3 Series E30 325i (M20) SAL
Block Distance of Drive Pinion
Secure dial gauge in special tool 33 1 481 (measuring fixture).
Place special tool 33 1 461 (measuring fixture) with dial gauge
on special tool 33 1 462 (measuring dics) and set dial gauge
with preload at zero.
Fit special tool 33 1 462 (measuring disc) to drive pinion.
Install special tool 33 1 461 (measuring fixture) in housing.
Determine value Y.
Basic distance C = 11.50 mm
Gage thickness B = 9.50 mm
Examples for Determination of Correct Shim Thickness (X)
RA Replacing input bevel gear and crown wheel (Type M) - final drive housing remove
BMW AG - TIS
26.01.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -